Half Round Ridge Tiles are available in concrete and clay. Concrete colours are:
Rosemary clay colours are
Half Round Ridge Tiles can be dry fixed or mortar bedded and mechanically fixed. When ridge tiles are mortar bedded and mechanically fixed, use the Mortar Bedded Fixing Kit (9314). A 6 mm diameter hole should be carefully drilled centrally in each ridge tile.
Half Round Block End Ridge Tiles or Half Round Ridge End Caps must be used at the verge when using Cloaked Verge, Ambi-Dry Verge, DryVerge or Rapid DryVerge.
Half Round Block End Ridge Tiles are available in concrete only in all the same colours as Half Round Ridge Tiles. Half Round Ridge End Caps are available in colours Slate Grey and Rust.
Clay Capped Half Round Ridge/Hip Tiles are available for use with Hollander Clay Pantiles in Red and Brindle and Old Hollow Clay Pantiles in Vintage Blue and Vintage Red.
When Continuous Ridge is used with Hollander, use Rich Terracotta Half Round Ridge Tiles with Hollander Red and Terracotta Brindle Ridge Tiles with Hollander Brindle.
When using Old Hollow, Hollander, Regent, Grovebury, Fenland Pantile or Landmark Double Pantile with mortar bedded and mechanically fixed ridge tiles, bed Dentil Slips in the pans of the tiles.
Church’s crowning glory sees BMI Redland reach the heights
Craftsmanship and attention to detail received their just reward when the re-roofing of Shettleston New Parish Church in Glasgow’s East End won the Roof Tiling category in the National Federation of Roofing Contractors’ UK Roofing Awards.
A force for good in roofing
As part of an initiative to attract former service personnel into the construction industry, Coleg Cambria, Deeside, North East Wales; is hosting a Forces in Construction Insight Day on October 10th.
BMI pitches up with a new flat roof training facility
Following the completion of a new BMI Icopal flat roofing training area, and the refurbishment of the existing BMI Redland pitched training facility, BMI’s National Training Centre is now able to offer contractors, merchants and students an extensive range of both pitched and flat roof courses at the one location. This makes BMI the only UK roofing manufacturer able to offer training in both disciplines and at the one site.