The DryVent Monoridge System provides a continuous weathertight air path from the roof void to the outside with a mechanically fixed monoridge to comply with the requirements of the Building Regulations.
Minimum pitch is the minimum pitch of the tile or slate, except Regent where it is 15°.
Maximum pitch with Half Round Monoridge Tiles is:
When used with rigid sarking and counterbattens the maximum pitch with Half Round Monoridge Tiles is:
Maximum pitch with Universal Angle Monoridge Tiles is:
When used with rigid sarking and counterbattens the maximum pitch with Universal Angle Monoridge Tiles is:
The effective ventilation area per metre run of ridge is 5,000mm².
Each pack contains sufficient components to secure 6 monoridge tiles.
In addition, monoridge tiles will be required along with Block End Monoridge Tiles, Left Hand and Right Hand, at all gable ends. Please note that Block End Monoridge Tile are only available in colours Slate Grey, Terracotta and Tudor Brown plus Brown for Half Round.
A timber batten, 25 mm thick, must be fixed vertically to allow monoridge tile fixing.
Redland Mini Stonewold is the perfect solution against high winds in Orkney
With prevalent high winds in excess of 130mph on the Orkney Islands, a solution was required that could withstand these elements when it came to roofing a new facility for elderly and vulnerable members of the community. The BMI Redland Mini Stonewold Slate was chosen due to its strength, robustness and appearance of natural slate.
A new faster, safer, stronger and lighter metal tile solution from BMI
Drawing on its extensive experience in lightweight metal tiles,BMI – is setting new standards with the introduction of AeroDek. A roofing solution built for the future, AeroDek is faster, safer, stronger and lighter than traditional roof coverings; while replicating the high aesthetic of clay, concrete or slate in a tile guaranteed to last for 40 years.
Band of Builders and BMI team up for community project
When building charity Band of Builders learnt of the challenges faced by plasterer Iain Dodd’s family, it was eager to do what it could to help. Band of Builders – “run by tradespeople, for tradespeople” – aims to help members of the construction industry community when times get tough: and tough describes the Dodd’s family situation.